• ''M25'': stoppen SD-kaart print
  • ''M109'' Sxxxx temperatuur instellen en wachten tot ie warm is (+ nog een paar seconden)
  • ''M105'' get temperature
  • ''M104'': Set Extruder Temperature: M104 S190
  • ''G91'': Set to Relative Positioning
  • ''G90'': Set to Absolute Positioning
  • ''G01 F10000 X50 Y50'': move fast
  • ''M106'': fan on
  • ''M107'': fan off
  • ''M84'': disable axes
  • ''M110'': Set Current Line Number‎
  • ''M20'': list files on SD-card
  • ''G28'': Move to Origin
  • ''M115'': Get Firmware Version and Capabilities

Control LED brightness

M42 S0      ;off
M42 S128    ;half brightness
M42 S255    ;on

Make BEEP sound

M300 S300 P1000    ;S=freq Hz, P=duration

Play tune

M300 S100 P100
M300 S200 P100
M300 S300 P100
M300 S400 P100
M300 S500 P100
M300 S600 P100
M300 S700 P100
M300 S800 P100

Put text on screen

G4 P200
M10001 X10 Y25 SHeating nozzle...
G4 P200 
M10001 X3 Y25 SDoodle3D Printing...
M10004 X1 Y56 W128 H8
M10003 X1 Y56 W10 H8

current start/end gcode for Ultimaker Original


M104 S200
M109 S200
G21 ;metric values
G90 ;absolute positioning
M82 ;set extruder to absolute mode
M107 ;start with the fan off
G28 X0 Y0 ;move X/Y to min endstops
G28 Z0 ;move Z to min endstops
G1 Z15.0 F9000 ;move the platform down 15mm
G92 E0 ;zero the extruded length
G1 F200 E6 ;extrude 6 mm of feed stock
G92 E0 ;zero the extruded length again
G1 F9000
;Put printing message on LCD screen
M117 Printing...


G1 F1500 E390.2043
M104 S0 ;extruder heater off
G91 ;relative positioning
G1 E-1 F300  ;retract the filament a bit before lifting the nozzle, to release some of the pressure
G1 Z+0.5 E-5 X-20 Y-20 F9000 ;move Z up a bit and retract filament even more
G28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way
M84 ;steppers off
G90 ;absolute positioning
M104 S0


binary gcode by repetier